DESIGN:
- Superior surface finish is produced by the 3 precision ground cutting edges.
- Ground chipflow and lower heat retention is provided by the 3 flute design.
- Fast feed rates are possible due to the high performance tool geometry.
- Submicron, corrosion resistant, extended life carbide provides increased durability and resistance to resin build-up.
- 30º Helix design with plunging capability.
APPLICATION:
- For exceptionally smooth finishing cuts.
- Superior finish on hardwoods, softwoods, laminated panels, MDF, chipboard, plywood, and solid surface materials.
- 3 Flute design allows for two cutting edges to be engaged at all times, providing greater stability and reducing run-out.
- Increased number of bite marks per inch reduces chip size and provides a smooth finish on the core of plywood and particleboards, especially important when edge-banding without pre-milling operations.
- Eliminates chipping, fuzzing & tear-out when the end of the upcut/downcut cutting edges are further than 1/16" from the top and bottom faces of the board.
- Use a "Mortise" upcut length of 0.188" when cutting rebates, dados or pockets.
- If part movements is a concern, use a "Mortise" upcut length of 0.188".
- When possible select a router bit with a longer upcut length to improve chip ejection form the cutting path.
- For improved dust extraction use an Aerotech (Page FC21)
FOR A PRICE, RING 01204 701000 !!